$ 69
4.5 (425)
In stock
Arrives by Tomorrow
.
Order within 00 hr 00 min
Save $10.35 off this item after joining.
Description
Filters Replacement Judgment The recommended replacement intervals for cartridges under general use are as follows. Primary filter cotton: effectively prevent large particles of 3μm and above from entering the next filter system, and reduce the risk of clogging, easy to replace, the recommended replacement cycle is 1 month (under normal use). Note: Three layers of filtration because the impurities in the filtered smoke is darkened, but does not necessarily mean that the blackened need to be replaced, there is no filtering ability Q1:The difference in suction power is not obvious when the rotating speed of the fan is adjusted A:This is the new version has improved the knob problem, the knob adjustment, wind speed changes more obvious Q2:No replacement filters available A:The comgrow replacement filters have arrived, please buy them directly, ASIN:B0BKL4V4RQ Comgrow laser enclosure 700*700*500mm and Solder Smoker Absorber Fan and 2 in 1 Hose Smoke Absorber combination together. The laser enclosure prevents the spread of smoke from the laser engraving process, and the solder fume absorber fan helps the 2-in-1 Hose Fume Absorber to absorb the fumes generated during the engraving process, resulting in better fume absorption and an optimal engraving environment [Super Strong 3 Stage furification]-The Comgrow smoke absorber has a 3 stage filter. The first layer of high-density filter will initially trap large particels such as dust and debris,and the second layer of High Efficiency H13-Grade HEPA Filter remove at least 99.97% of particles with a size of 0.3 microns (um),the third layer Activated Carbon Filter remove VOCs [Adjustable high suction fan]-The solder fume extractor has higher rotational speed,up to 7000RPM,air volume 43CFM. [23 Inch Tube Telescopic]- The smoke absorber tube can change direction 360 degrees at will, it can also be stretched and compressed.
